Page 1 of 3

Solar System

Posted: Sat Mar 15, 2025 8:52 pm
by davey110
This is my latest version with several improvements:
Option to go directly to Today’s Date
Approximate Daytime region of sky is shown
Improvements and corrections to Leap Year calculations
Improvements in going to specific starting date
Sliders now work while Paused

-Leap Year calculations have several exceptions in other Centuries. They can be added if you want. They make a very long IF-THEN statement.
-Daytime sky is an estimate based on Mercury not being visible after sunrise.
-Startup Date (Day# 0) can be changed. The required data can be obtained at the web site given in the REM statements.

Code: Select all

'g'.   
'    ==== NEW FEATURES: Jan 1 (2925) Start date ====== 
/*                      Goes to specific Start Date instantly =======       Nov 19/2026
                        Gpttion to go directly to Today's date
                        
Version 2: Misc improvements: Pause, improved scaling, 2-digit year input
Version 3: Added (simulated) elliptical orbit for Mercury
Version 4: Goes directly to a future date w/o drawing the intermediate dates, ie only 
           updates the dates, but runs faster by not drawing them all. The STEP is 
           never >1, so drawing is always accurate while in this mode. 
Version 4.1  Fixed problem of on-screen keyboard entry not displaying properly. 
               Not posted to Forum. Replaced by Ver5.
Version 5. Changed Specific Date section to all GRAPHICS. Replaces Ver4.1
Version 6: Changed Startup date to Jan 1, 2025
Version 7: Goes to calculated specific start date instantly.
      7.1: Added day/night skies, and Goto Today's date
-----------------------------------------------
    Although this program shows the planets positions reasonably accurately on any particular date, it is not designed to be precise; the orbit diameters are to scale, but are circular, not elliptical, so the orbital speeds are constant, not varying at perihelion & aphelion. This will give a slight inaccuracy in their positions, which, at the scale drawn, will probably not be noticable to the naked eye. In particular, Pluto's orbit is represented by a circle with its centre offset from the Sun so that it crosses Neptunes orbit in a realistic looking manner, though not perfectly accurate.
     The Moons distance from earth is greatly exaggerated to make it distinguishable from Earth. Although I suppose zoom could be increased. 
     The planets sizes are not to scale, other than the inner planets being smaller than the outer ones. The sizes do not change with the zoom.
     Day#1 is Jan 1/2025, because that was the best date I could find data at the time.
   Note: Celestial Longitude is measured CCW; Smart BASIC measures angles CW. This can be confusing.
   DRAW etc co-ordinates are for iPad mini: screen size  sw=1024   sh=724
  hh===========================================================    
  
 RAW DATA from an astronomy handbook; only used for ref when writing program:
 
   	 Dist(millions-km)   Revolution(days)
Mercury  	   57.9 	             87.969
Venus	     108.1	             224.7
Earth	     149.5	             365.258 BUT PROG USES 365.0   SEE LEAP YEAR NOTE BELOW. 
Mars	         227.8                 687.0
Jupiter	  778	                    4332 days = 11.86 years (program works in days)
Saturn	  1427	             10760      = 29.46
Uranus	  2869	             30685      = 84.01
Neptune     4497	             60195      = 164.8j
Pluto	     5900               90475      = 247.7   
Moon             0.3               27.321661

Moon's distance is greatly exaggerated in the diplay, to distinguish it from Earth.
Pluto Eccentricity = 0.25  Longitude of Perihelion = +224º  
Mercury Eccentricity=0.2        "    "      "      = +77.5º 
  (NOTE: + angles are CCW on real sky, but draw CW in BASIC. This can be confusing.)
Pluto's & Mercury;s eccentricities are simulated by an offset circle.

NOTE re LEAP YEARS: Planet orbital periods are Earth days based on 365.0 days per year, i.e Calendar days. Therefore Earth period and position is calculated with 365.0 days, with the extra day added every leap year. This also adds the 1 day to the planets' periods. This is very confusing to work out, but it seems to be correct.  Also, the Leap Year calculation (in the Date Calculation section) should contain exceptions to the exceptions, but those shown will not show any visible error for several hundred years. Enough is enough! 

*/ '=============== PROGRAM BEGINS HERE =============================
'b'
OPTION BASE 1 
OPTION ANGLE DEGREES   
OPTION SPRITE POS CENTRAL
SET BUTTONS CUSTOM
SET BUTTONS FONT SIZE 35
DIM pname$(10), dist(10), pper(10), mon$(13), days(13) 'dacc(13) 
  ' pperiod (days), dist (mill km) init pos of planets is 1 Jan 2025 = Day# 1.
  ' dacc() is day# of year on last day of each momth
  ' days() is num of days in each month

'r'
'Calendar for dates:
DATA "Jan",31,"Feb",28,"Mar",31,"Apr",30,"May",31,"Jun",30,"Jul",31,"Aug",31
DATA "Sep",30, "Oct",31,"Nov",30, "Dec",31

FOR i=1 TO 12
   READ mon$(i), days(i)
NEXT i

'------------------------------------

'Table of planet data: From  https://eco.mtk.nao.ac.jp/cgi-bin/koyomi/cande/planet_ecliptic_en.cgi
	'	Dist(mill km)  RevPer (d)  Start date is initial pang() of Dec 31.2024 = Day# 0
DATA "Mercury", 57.9, 87.969, -199.4088, "Venus", 108.1, 224.7, -49.81, "Earth", 149.5, 365, -99.47 
DATA "Mars", 227.8, 687.0, -108.77879, "Jupiter", 778, 4331.98, -78.26455, "Saturn", 1427, 10760, -349.77655    ' 1 Earth day is defined as 365.0 per year
DATA "Uranus", 2869, 30685, -55.73444, "Neptune", 4497, 60194, -359.14093, "Pluto",5900,90475, 60.1233, "Moon", 7, 27.321661, 73.467 'moon dist is exaggerated to display outside earth.
   ' Note: Plutos orbit is centred at OFFSET of 56, -73 to simulate ellipse. 

FOR i=1 TO 10   'incl moon when i=10. 
   READ pname$(i), dist(i), pper(i), pang(i)  
         '1st pang(i) (starting date) is init pos of planets on JAN 1/25.
         ' Note: initial pang() (planet angle) is starting angle ====
   ovel(i)= -360/pper(i)   'orbital vel.(degrees/day) (**is ccw) ============== 
NEXT i

'g'
GRAPHICS
GRAPHICS CLEAR 0, .8, 1
DRAW COLOR 1, 1, 1

 sw=SCREEN_WIDTH() ! sh=SCREEN_HEIGHT()    ' 1024 x 724; iPhone: auto
 sw2=sw/2-50 ! sh2=sh/2  ' 50 pix left of centre screen, to allow Plutos orbit
 dscale= .8              ' scale for drawing circles (orbits)
''
spw=1000 ! sph=1000          'sprite width, height
SPRITE "bg" BEGIN spw, sph   'daytime sky background 
  FILL COLOR 0, .8 , 1
  FILL TRI 500, 500,   0, 280,   0, 720
SPRITE END

SPRITE "bg" RESIZE 8000, 8000 'resize even larger will "fuzz" the edges for more realistic
 
SPRITE "bg" ALPHA 0.3   ' Text is behind the sprite  
'-------------                 'ALPHA is really Opacity, not transparency

'r' STARTUP DATE & some SETTINGS =================================================
yr=2024     'starting date (day #0)
m=12        ' Start date (Day# 0) is Dec 31/2024 ***** (Day#1 is Jan 1/2025)*****
d=31 
daynum=0    ' 1 is added to date & day# on 1st iteration of  "main:"  loop.aAa
STEP=1      'default
pse=1       '1=start up with PAUSE on. 0=start up running

'c'
50
'GRAPHICS !' GRAPHICS CLEAR 0,0,.7
'FIELD "ask" TEXT "Go directly to specific date? y/n" AT 100,100 SIZE 500,50   'create 
FIELD "ask" TEXT "Go to Today? (t)       Other date? (y/n)" AT 100,100 SIZE 500,50   'create 
FIELD "ask" FONT SIZE 25
FIELD "ask" SELECT
DO
UNTIL FIELD_CHANGED("ask")=1

y$=LOWSTR$(FIELD_TEXT$("ask"))
IF y$<>"y" AND y$<>"n" AND y$<>"t" THEN 50    '- invalid entry

IF y$="n" THEN GOTO 60           ' date search not req;d
         
IF y$="t" THEN        ' todays date
  dsp=CURRENT_DATE()
  msp=CURRENT_MONTH()
  ysp=CURRENT_YEAR()
  ch$="t"
  'GOTO 60
ENDIF
 
sd=1       ' activate specific start date routine 

FOR i=1 TO 10
  pang(i)+=ovel(i)   'inc 1 day to set pang() to day#1 if y$"y" or "t"
NEXT i

FIELD "ask" DELETE
IF y$="t" THEN GOTO 60  ' skip date input

GRAPHICS CLEAR 0, 0, .7
FIELD "d" TEXT "Date" AT 100,50 SIZE 100,50   'create 
FIELD "d" FONT SIZE 25
FIELD "m" TEXT "Month#" AT 100,100 SIZE 120,50   'create 
FIELD "m" FONT SIZE 25
FIELD "y" TEXT "Year (yy or yyyy)" AT 100,150 SIZE 230,50   'create 
FIELD "y" FONT SIZE 25
'r'
55      ' ======= Specific "Go-To" date Entry ================
FIELD "d" SELECT
FIELD "d" TEXT "Date"
  DO
  UNTIL FIELD_CHANGED("d")=1
dsp=FIELD_TEXT$("d")
  
'----------------------
FIELD "m" TEXT "Month#"
FIELD "m" SELECT
  DO
  UNTIL FIELD_CHANGED("m")=1
  
msp=FIELD_TEXT$("m")
FIELD "m" TEXT mon$(msp) 
'--------------------
57
FIELD "y" SELECT
  DO
  UNTIL FIELD_CHANGED("y")=1
ysp=FIELD_TEXT$("y")
IF ysp<100 THEN ysp=ysp+2000  ' "yy" format only in this century!!
IF ysp<2025 THEN 
  FIELD "y" TEXT "Yr must be >2024"
  GOTO 57
ENDIF
                                                                                                                                 
FIELD "y" TEXT ysp
'-------------------
FIELD "ok" TEXT "Confirm?  y/n" AT 100,250 SIZE 250,50
FIELD "ok" FONT SIZE 25
FIELD "ok" SELECT
  DO
  UNTIL FIELD_CHANGED("ok")=1
y$=LOWSTR$(FIELD_TEXT$("ok"))

IF y$<>"y" THEN GO TO 55
59
FIELD "d" DELETE ! FIELD "m" DELETE ! FIELD "y" DELETE ! FIELD "ok" DELETE
''
60 linum=60

FIELD "ask" DELETE  ' when no specific date entered
FILL COLOR 1,0,0    ' for button colour.   
 DRAW FONT SIZE 22
   BUTTON "toggle" TEXT "PAUSE" AT sw-200, sh-80 SIZE 130,70
 DRAW FONT SIZE 20
SLIDER "scale" VALUE 0.9 AT 1000, 600 SIZE 400 ANGLE -90   ' zoom, & initial value
SLIDER "speed" VALUE 0.3 AT 20, 600 SIZE 400 ANGLE -90     'speed

dsc=0   'initial scale
found=0
SPRITE "bg" SHOW
62 linum=62
'g'================= MAIN LOOP ============================
 main:
GRAPHICS CLEAR 0, 0, .3     'very dark blue sky

REFRESH OFF ' stops flicker - don't update screen during calculations, 
DRAW FONT SIZE 20
SPRITE "bg" SHOW   'Show daylight sky background; REM out if not wanted

'Heliocentric Longitude etc markers ---------------------
DRAW LINE sw2+250,sh2 TO sw2+330, sh2 ! DRAW TEXT "0º" AT sw2+335,sh2-10
DRAW LINE sw2-250,sh2 TO sw2-330, sh2 ! DRAW TEXT "180º" AT sw2-380,sh2-10
DRAW LINE sw2,sh2-250 TO sw2, sh2-300 ! DRAW TEXT "90º" AT sw2-13,sh2-320
DRAW LINE sw2,sh2+250 TO sw2, sh2+315 ! DRAW TEXT "270º" AT sw2-18,sh2+320

DRAW TEXT "Spring Equinox" AT sw2-400, sh2+10
DRAW TEXT "Summer Solstice" AT sw2+10, sh2+300
DRAW TEXT "Fall Equinox" AT sw2+300, sh2+10
DRAW TEXT "Winter Solstice" AT sw2+10, sh2-300

' ----- Jan 1 mark for Earth:  ================
DRAW LINE sw2-dist(3)+100,sh2-dist(3)-110 TO sw2-dist(3)+140, sh2-dist(3)+100
DRAW TEXT "Jan 1" AT sw2-dist(3)+65, sh2-dist(3)-130

DRAW LINE 1, 510 TO 50,510  'just a marker for change of STEP
65 linum=65
         
'========== READ SLIDERS ===========
sv2=SLIDER_VALUE("speed")   'orbital speed

IF sv2<=0.3 THEN            ' The lower part controls the PAUSE duration (at the
   STEP=1                   ' end of the loop), allowing a slower                                  
   pdelay=24*(sv2-.3)^2     ' display speed for the inner planets.
   
ENDIF
IF STEP>25 THEN STEP=25   'STEP>28 could skip a whole month, throwing off the date display

IF sv2>.3 THEN   'The upper part of the slider range varies the STEP, ie
                 'how many days pass for each iteration of the loop,
                 'allowing a higher display speed for the outer planets.
             ' **NOTE: if STEP > ~15 or 20 the accuracy will be reduced.**
    DRAW COLOR 1, .5, .5                       
    DRAW TEXT "*STEP IS " & INT(STEP) & " DAYS" AT 40,450   'WARNING msg:
                            ' if STEP >than ~20 days, accuracy may be reduced.
    DRAW COLOR 1,1,1   
    pdelay=0                ' pause at end of main: loop                 
    STEP=INT(MAX(1,200*(sv2-.3)^2))
ENDIF

'found=0
skip=1
'dbp

'r'
1000  linum=1000 '========= DATE CALCULATION: =========--=-=-=-=-=-=-=-=-=-=
     IF daynum=0 THEN days(2)=28 ' * Because Start Date (Day#0) is last day of 2024
           
1010 linum=1010

FOR stp=1 TO STEP       ' check through STEP ates. sd=0
1400 linum=1400
    d=d+1              ' next day (date) of month------
linum=1410
    daynum=daynum+1
 linum=1420
    IF d>days(m) THEN   ' next month ----------------
       m=m+1
linum=1430               
       IF m>12 THEN     ' next year
         m=1            ' reset month to Jan. 
         yr=yr+1        ' next year ------------ 
1450
linum=1450

         IF yr/4=INTEG(yr/4) AND yr/100<>INTEG(yr/100) THEN 'SEE LEAP YEAR NOTE ABOVE
            days(2)=29    ' is leap year!
         ELSE
              days(2)=28  ' reset to default after leap year
         ENDIF       
       ENDIF  
    d=1                   'reset date   
    ENDIF
linum=1480

IF sd=0 AND ch$<>"t" THEN GOTO 1800   ' CONTINUE stp   ' skip date search ===========

1500 linum=1500

'------------ look for stop (start) date -----------------
   IF d=dsp AND m=msp AND yr=ysp THEN  'found date.   d, m, yr
      skip=daynum-1  'for planet ang pang()
      found=1     'found stop date
   ENDIF   'keep looking
linum=1600
   IF found=0 THEN GOTO 1400
 
   BREAK stp                'date found=1 so jump out
1800 linum=1800
NEXT stp                    'next step

'---------------------------------------------  
1900  linum=1900             '   ***** Now daynum is where to skip to *****
'g'

  DRAW TEXT INT(d) & " " & mon$(m) & " " & yr AT sw-160, 60
  DRAW TEXT "Day# " & INT(daynum) AT sw-160, 30
  DRAW TEXT "ZOOM" AT sw-60, 200 
  DRAW TEXT "SPEED" AT 5, 200 

'-------------------- SCALE ------------ 

   'dsc=dscale*.3*(SLIDER_VALUE("scale"))+.024  ' set values
dsc=dscale*.95*(SLIDER_VALUE("scale"))^2 +.03   ' better display scale factor; use this one

'Pluto and Mercury's orbits are elliptical; simulate as off-centre circle:
'  The following prevents the offsets from apparing to vary with Zoom value).
poffx=dsc*3100*COS(224-180)   '2000   'Pluto Perihelion = +224º (-224 in BASIC)
poffy=dsc* -3100*SIN(224-180) 'Vary Pluto offset according to dsc (zoom/drawing scale).
                              
moffx=dsc* -25*COS(77.5)    ' Mercury Perihelion = +77.45º  (-77.45º in S-BASIC)
moffy=dsc*25*SIN(77.5)      ' Vary mercury offset according to dsc (scale)

FILL COLOR 1,1, 0 ' yellow, for sun
FILL CIRCLE sw2, sh2 SIZE 25*dsc 'Sun, variable size, according to zoom scale
DRAW COLOR 1, 1, 1          ' white, for planets & orbits

' ============== ORBITS ----- depend on scale -------------------
FOR i=1 TO 9                
  IF i>1 AND i<9 THEN DRAW CIRCLE sw2,sh2 SIZE dist(i)*2*dsc  'draw orbits of 8 planets
  GOSUB offsets            ' 1 is Mercury, 9 is Pluto:
  IF i=1 OR i=9 THEN DRAW CIRCLE sw2+pxoff, sh2+pyoff SIZE dist(i)*2*dsc 
NEXT i
'dbp

'b' ============= PLANETS ======= depend on scale & step =========

2000 linum=2000 
FOR i=1 TO 10
  FILL COLOR 1,1,1               'white, for planets
  IF i=3 THEN FILL COLOR .2, .2,  1  'blue, for Earth only
  IF i=4 THEN FILL COLOR  1, .5, .5  'reddish, for Mars only
  IF i=7 THEN FILL COLOR .4,  1, .4  'greenish, for Uranus only
  
2100 linum=2100
  pang(i)=pang(i)+ovel(i)*skip*STEP 'new angular pos each day (or each STEP in  '  FOR loop) but NOT when PAUSED.                                                                                                                                                                       
                                                                                                                                                                     2110 linum=2110
pang(i)=pang(i)%360      ' a%b is  (a MOD b) or MOD(a,360)
  
  sz=8           'planet size       
  IF i<=4 OR i=9 THEN sz=4 ' inner planets & Pluto are smaller
  
  GOSUB offsets
  
' planets only: dsc is the drawing scale.
 IF i<10  THEN  
   x(i)=dist(i)*2*COS(pang(i))*dsc + pxoff  ' dist to planet from sun; x position
   y(i)=dist(i)*2*SIN(pang(i))*dsc + pyoff  ' ditto, y position
   FILL CIRCLE sw2+x(i), sh2+y(i) SIZE sz   'draw planets
   DRAW TEXT LEFT$(pname$(i),2) AT sw2+x(i), sh2+y(i)+8  'place below planet
 ELSE    'i=10 is the moon  
   DRAW CIRCLE sw2+x(3), sh2+y(3) SIZE dist(10)*2*dsc  'MOON ORBIT, ctr on Earth
   
' MOON POS'N: ----------
   x(10)=sw2+x(3)+dist(10)*2*COS(pang(10))*dsc  'posn in orbit
   y(10)=sh2+y(3)+dist(10)*2*SIN(pang(10))*dsc 
   FILL CIRCLE x(10),y(10) SIZE 5*dsc 'centred at current posn of Earth+dist from Earth
 ENDIF
 
 SPRITE "bg" AT sw2+x(3), sh2+y(3) ANGLE (pang(3))      ' daylight sky region
 
2200 linum=2200
NEXT i
'=====================================================
skip=1
sd=0
REFRESH ON  'now update the screen

PAUSE pdelay   'to set speed - pdelay is set by Slider "speed"

5000 linum=5000
'g'   ========== PAUSE BUTTON ROUTINE =========
IF found=1 THEN pse=1
IF BUTTON_PRESSED("toggle")=1 THEN pse=1-pse

5010 linum=5010

IF pse=1 THEN
   BUTTON "toggle" SET TEXT "RUN"     'paused
     DO                'do nothing until button pressed again    
       IF SLIDER_CHANGED ("speed") THEN GOTO main  
       IF SLIDER_CHANGED ("scale") THEN GOTO main  
       IF BUTTON_PRESSED("toggle")=1 THEN pse=0
     UNTIL pse=0
ENDIF

'c'   
5020 linum=5020
BUTTON "toggle" SET TEXT "PAUSE"     'running 

found=0  ' } Done searching for date;
ch$=""   ' }     now is regular running.
GOTO main

END      ' Just for protection ===============

'======================================================

'r'===================== SUBROUTINES & DEFs ======================
offsets:     ' set offsets for Mercury & Pluto orbits, to simulate ellipses
pxoff=0 ! pyoff=0  ' zero offset for most planets & moon
  IF i=1 THEN    'Mercury
     pxoff=moffx ! pyoff=moffy    'Mercury offset
  ENDIF
 
  IF i=9 THEN    'Pluto
    pxoff=poffx ! pyoff=poffy     'Pluto offset, to simulate ellipse
  ENDIF
 ' other planets & moon- no offset

RETURN

END

''=========================================

DEF dbp ! DEBUG PAUSE ! END DEF  'this is very helpful for debugging (refer to lnum)
'r'
''

Re: Solar System

Posted: Sun Mar 16, 2025 1:10 pm
by Henko
Hi Davey,
After copying the source and running it, i got 3 consequtive error messages.
The starting combi /* had to be inserted at the beginning of the file,
In the section “Planets”, there were missing statements “end if” and “next i”.
Adding these made the progam run nicely 8-) .

Re: Solar System

Posted: Sun Mar 16, 2025 4:41 pm
by smbstarv
Where should these missing next and endif''s be inserted....?

Re: Solar System

Posted: Sun Mar 16, 2025 7:39 pm
by Henko

Code: Select all

' MOON POS'N: ----------
   x(10)=sw2+x(3)+dist(10)*2*COS(pang(10))*dsc  'posn in orbit at pos'n of Earth
   y(10)=sh2+y(3)+dist(10)*2*SIN(pang(10))*dsc 
   FILL CIRCLE x(10),y(10) SIZE 5*dsc  'at current posn of Earth plus dist from Earth

  end if     ' insert here
next i       ' insert here

REFRESH ON  'now update the screen

Re: Solar System

Posted: Mon Mar 17, 2025 4:57 am
by davey110
Thank you for trying it out. I have updated the listing to show the corrections, (just before the REFRESH ON statement). I must have accidenally deleted these during the transferring from my listing to the Forum. (I did some minor editing after transferring).

I have changed the formulas for interpreting the SLIDER("speed") values (near the start of the "main:" loop), and also deleted the "intermediate" part of that routine, as it didn't really make much difference. The "speed" slider now calculates the display speed non-linearly in both upper and lower parts of it's range. This gives a smoother control of the speed. You'll see there is a gap between slider values 0.2 and 0.3 (in the IF statements). Nothing happens in this range - it just makes it easier to set the minimum pdelay (PAUSE) without starting to skip days (STEP), the same as the part I deleted did. (If you want to play with these equations, a graphing calculator is indispensable. There are apps for some.)

You also may notice that Pluto's orbit changes with zoom. To correct this, it's "offset" would have to vary with the the zoom, instead of remaining constant.. I didn't think that was worth the effort. Have a go at it if you like.

Let me know if you have any suggestions.

Re: Solar System

Posted: Sun Mar 23, 2025 11:50 pm
by davey110
I have made a small revision to colour the Stop button red [Add: SET BUTTONS CUSTOM (near the top) and FILL COLOR 1,0,0 (where the button is created)].

Re: Solar System

Posted: Fri Mar 28, 2025 8:21 pm
by Chooch912
First- thank you for educating me with a new vocabulary word: Orrery.
Second, this is truly a work of art so thank you for not only creating it but sharing it.

I am trying to learn more about how this works by looking at each line of code (not always easy for an 80 year old whose only programming language background is "Business Basic" from the 1980's).

Re: Solar System

Posted: Wed Apr 16, 2025 3:39 pm
by davey110
Chooch912- I'm coming up 90 in 2 months, so keep on programming! If you need any explanations in Solar System I'll be happy to help.

My introduction to BASIC was in the 1970's on a time-share IBM main-frame computer with input and paper output on a teletype machine, and we saved our program on (and loaded from) punched tape.

Re: Solar System

Posted: Wed Apr 16, 2025 4:42 pm
by davey110
I have posted Version 2 of SolarSystem.sb in the original post, with the following changes that I hope are improvements:

- smoother scaling, especially for the outer planets.

- Stop/Go button is now a Pause/Go button. This allows adjusting of Scale & Speed while paused or stopped at a Stop Date. Go will restart it from that point. (I found this necessary in order to see a conjunction of an outer planet e.g. Uranus on 17 May/25, or when an outer & inner planet are close together in the sky),

- Year of stop-date in this century can be input as 2 or 4 digits.

Note that if STEP is more that 1, it could skip over a stop date. Hence the warning message.

The centre of Pluto's orbit shifts with scale. It could be fixed by scaling it's offset, but it's hardly worth the trouble for the small scale range that it's on-screen.
BTW I am using an iPad mini. I don't know if that affects the display or not. If it does, you'll have to figure out the corrections required for a full-size display. The 2 sliders should be on the extreme left & right of the screen.

I have checked the program for accuracy using several future lunar and solar eclipses. The position of the moon tracks very well with where it should be on those dates. (The date can vary depending on what time zone you're in. The program is based on data for North America Pacific time).

Anybody is welcome to make any other changes you would like.

Re: Solar System

Posted: Sat May 03, 2025 9:33 pm
by davey110
Version 3 of Solar System.sb (now posted) includes a (simulated) elliptical orbit for Mercury. I add this because it is almost as elliptical as Pluto, and is apparent in the display. I have also corrected the orbit "offsets" of Mercury & Pluto so that they don't vary as you change the Zoom level. (At least they don't change noticeably.) I include Mercury's elliptical orbit partly because it is the orbit that Einstein explained that the distortion of space-time near the Sun causes it's perihelion to advance by about 1.5° per century. I mention this only for interest- it is not included in the program.